Integral Water Proofing Compounds for Cement Mortar & Concrete (Powder)

PRODUCT CODE : WPP

DESCRIPTION
  • WPP contains highly concentrated mixture of active ingredients to make concrete waterproof.
  • WPP is non-toxic and non-flammable.
  • WPP contains PORE-FILLING agents which fill up the micro cements.
ADVANTAGES:
  • BIS certified product.
  • Each batch goes under five stringent lab tests before packing.
  • WPP improves workability of concrete and mortar.
  • WPP does not contain SULPHATE.
  • WPP mixes uniformly, thoroughly and easily with all kinds of cements.
  • WPP is economical and environment friendly.
  • Chloride Content less than 0.05%.
WHERE TO USE :

For concrete and mortar in basements, roof slabs, screeds, water tank, external plastering, bathrooms, and balconies etc.

METHOD OF USE :
  • Use 1kg (1 pack) of WPP to 1 bag (50 Kgs) of old portland cement.
  • Mix WPP thoroughly with cement and sand, mix water as usual.
  • For machine mixing, add the measured quantity of sand/aggregate into the drum mixing continuously.
  • Add the cement slowly and sprinkle the correct quantity of WPP at the same time.
  • Mix the dry materials for at least five minutes.
  • Add the normal measured quantity of water and mix to completion.
  • For best results, use in conjunction with pressure grouting and membrane coating.
CAUTION :
  • Keep away from children.
PACKING :

Available in 1kg pre-weighed temper proof box.

SHELF LIFE :

Two years from the manufacturing date if stored in sealed containers.

HEALTH & SAFETY PRECAUTIONS:

As with all chemical products caution should always be exercised.Protective clothing such as gloves and goggles should be worn. Treat any contact to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed, do not induce vomiting but call for medical assistance immediately.

DISCLAIMER :

This information intended only for general guidance in the application of our products. Because of the large number of possible methods of application and processing, we are unable to accept responsibility in anyone particular case or application.

All product information's & application details given by Riya Chemy & its agents has been provided in good faith & meant to serve only as a general guideline during usage. Users are advised to carryout tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products. Since the correct identification of the problems, quality of other materials used and the on-site workmanship are factors beyond our control, there are no expressed or implied guarantee / warranty as to the results obtained.

Riya Chemy does not assume any liability or consequential damage for unsatisfactory results.

MSDS Download